Floors Refinished
Dust Captured
Workmanship Warranty
Years in the Asheville Area

What Does Refinishing Hardwood Floors Cost in Asheville?
Refinishing cost depends on square footage, the condition of the wood, how many stairs are involved, whether you are changing color, and which finish you choose. A screen and recoat on 800 square feet is a different number from a full sand and custom stain on a two story Montford home. Every estimate is free and itemized in writing.
OUR REFINISHING SERVICES
Hardwood Floor Refinishing in Asheville, NC
Asheville sits in a humid mountain climate where wood moves with the seasons. Add a century of foot traffic in Montford and Kenilworth bungalows plus the sun exposure common in West Asheville renovations, and the finish fails long before the wood does. Most floors we look at still have plenty of usable material left, which means replacement is rarely the right first answer.
Refinishing hardwood floors throughout Asheville and Buncombe County, including Montford, West Asheville, Kenilworth, Biltmore Forest, North Asheville, Weaverville, and Swannanoa.
WHAT TO EXPECT
What Refinishing Week Looks Like in Your Home
A full sand and refinish runs 4 to 7 days. Here is how those days actually go, so you can plan around them.
Before We Start
We walk the floors with you, confirm the scope and stain direction, and give you a written estimate. No charge, no obligation.
Day 1, Prep
Furniture comes out, doorways and HVAC returns get sealed, and the containment system goes in. Clear closets and take down wall art on shared walls before we arrive.
Days 1 to 2, Sanding
Multiple passes bring the floor down to bare wood. This is the loud part of the week, and the part where the 95% dustless system earns its keep.
Day 3, Stain
Your color goes down and gets wiped back by hand. The floor sits overnight before any finish touches it.
Days 4 to 6, Finish Coats
Three to four coats with a buff between each. Floors stay off limits while every coat sets.
Day 7, Walkthrough
We inspect the floors with you and hand off written care instructions covering when you can walk on them, when furniture returns, and when rugs go down.
Questions about your refinishing project?
Choose Your Finish
Bona Traffic HD
Commercial grade water based polyurethane. The most durable option we carry. The usual pick for homes with kids or dogs.
Bona Mega ONE
Fast drying and low VOC, which shortens the time your home is disrupted. Good when the schedule is tight.
Rubio Monocoat
A hardwax oil that penetrates the wood instead of sitting on top of it. Natural matte look, soft underfoot.
Osmo Polyx-Oil
Another hardwax oil, and the easiest of the four to spot repair without recoating the whole room.
DuraSeal Stain Colors
36 colors photographed on white oak, from warm honey tones to deep espresso. Samples are $5.99 each.
On-Floor Stain Samples
We apply your shortlisted colors to your actual boards so you see them in your own light before we commit the room.
Common Questions
How much does it cost to refinish hardwood floors in Asheville?
There is no flat rate. Cost depends on square footage, the condition of the wood, how many stairs are involved, whether you are changing stain color, and which finish you select. A maintenance screen and recoat is the least expensive option, and a full sand with a color change is the most. We measure on site or by virtual walkthrough and give you an itemized written estimate at no cost. Call 828.528.3150 to schedule one.
How long does hardwood floor refinishing take?
A full sand and refinish runs 4 to 7 days. A screen and recoat takes 1 to 2 days. A color change takes 5 to 7 days, because the stain needs time to set before finish coats go down. Square footage, humidity, and your choice of finish all shift the timeline, and we give you specific dates before we start.
Is dustless sanding really dust free?
No, and anyone who tells you otherwise is overselling it. Our containment system captures about 95% of the dust generated during sanding. That is the difference between a fine film on one shelf and a house that needs professional cleaning afterward. A small amount still goes airborne, which is why we also seal doorways and HVAC returns before the sanders come out.
Should I refinish or replace my hardwood floors?
If your floors are solid hardwood with enough thickness left above the tongue, refinishing is almost always the better value. It costs less than replacement, keeps the original material in your home, and can be repeated several times over the life of the floor. Replacement makes sense when boards are cupped beyond repair, water damage has reached the subfloor, or an engineered floor has a wear layer too thin to sand. We tell you which situation you are in during the estimate.
How do I care for newly refinished floors?
Give the finish time to cure before putting rugs down or sliding furniture back, and follow the written schedule we hand you at the final walkthrough. After that, sweep or vacuum with a hard floor setting, clean with a product made for hardwood, put felt pads under furniture legs, and keep indoor humidity steady through Asheville's seasonal swings. Our care and products collection has the cleaners we recommend.
Do you refinish floors throughout Asheville and Buncombe County?
Yes. Our Black Mountain showroom at 116 Montreat Rd is roughly 20 minutes east of downtown Asheville, and we refinish floors in Montford, West Asheville, Kenilworth, Biltmore Forest, North Asheville, Weaverville, and Swannanoa. Our Conover showroom covers the Catawba Valley and the rest of Western North Carolina.
Why Homeowners Trust Us With Their Floors
Bona Certified Contractor
Trained and certified on the systems we sand and finish with, not self taught on equipment we rent by the day.
95% Dustless Containment
Dust is captured at the tool rather than swept up afterward. Not dust free, but close enough that most clients stay in the house.
5-Year Workmanship Guarantee
Every refinish is backed in writing. If the finish fails on our work, we come back.
1500+ Floors Refinished
Fifteen plus years of sanding, staining, and finishing across Western North Carolina, including a lot of century old mountain houses.
Licensed, Bonded, and Insured
Full coverage on every project, and an NWFA membership that holds us to published industry standards.
We'll Talk You Out Of It
If your floors need a clean or a recoat instead of a full sand, we say so. The cheaper recommendation is often the right one.
Refinishing Floors Across Buncombe County
Our Black Mountain showroom sits about 20 minutes east of downtown Asheville, which means short drives, real scheduling windows, and a crew that can come back if something needs attention. We refinish in historic Montford bungalows, mid century ranches in Kenilworth, and renovations across West Asheville.
"They transformed our living room in North Asheville. The dustless sanding was exactly as promised—not a speck of dust left behind!"
— Kay S.Asheville Resident
"The team’s expertise in historic hardwood restoration was incredible for our Montford bungalow. They preserved the original character of our home with master-level craftsmanship. Best in Asheville, hands down!"
— David R.Montford Resident
"Their dustless sanding lived up to the hype—not a speck of dust in our West Asheville home. They truly understand how to handle the local humidity for a perfect finish. Highly recommend!"
— Catherine M.West Asheville Resident
Ready to Refinish Your Asheville Floors?
Tell us the rooms, the rough square footage, and what is bothering you about the floors. We will get back to you within one business day. Prefer to talk it through first? Call 828.528.3150, Monday through Friday, 9am to 5pm.
Ready to Transform Your Space?
Schedule your free consultation today and take the first step toward beautiful hardwood floors.










